Easy-to-read, question-and-answer fact sheets covering a wide range of workplace safe practices topics, from hazards to diseases to ergonomics to workplace promotion. Learn the applications and limitations before use. Only experienced and trained lathe operators ought to be permitted to operate lathes. A Wood planer turning lathe could be dangerous if not used properly. Wear safety glasses with side safety or shields goggles, or perhaps a face shield (with safety glasses or goggles) to protect yourself from flying chips. Wear respiratory protection when dust is generated (e.g., during sanding operations). What safety procedures in the event you follow when using a wood turning lathe? Be sure you understand instructions before attempting to utilize any tool or machine. Wear hearing protection that is suitable for the particular level and frequency from the noise you are exposed to within the woodworking area. What in the event you do before using a wood turning lathe? Browse the owner's manual carefully. Make reference to Woodworking Machines - General Safety Strategies for general safety precautions.
Wear protective footwear when required. Use sharp, well-maintained chisels and gouges. Use stock that is free of defects, such as for example loose knots, splits, cracks, or foreign objects. Hold tools firmly with both hands and against the tool rest. Adjust tool rests so that they are parallel and as close as you possibly can towards the stock. The actual speed of the lathe depends upon kind of wood, a diameter of stock, nature of work being done and type of tool used. Operate at speeds recommended by the manufacturer. Decide on a low speed and work with a moderate cut depth to prevent splinters from flying out during roughing operations. Work in well-lighted area. Before the lathe is turned on, ensure that all clamps and fittings are secure which the ongoing work piece is absolve to turn. Select a speed that is appropriate for the working job. Hold the stock in the faceplate or between your centres securely. Only use approved or furnished tools which are meant for lathe work.
They should also be set high enough so that tools will cut in to the wood slightly above the centre of the task being turned. Keep carefully the tip of the chisel held greater than the handle. Turn off power and lock out the device when making any adjustments or changes to the set up. Remove the tool rest when sanding or polishing. Examples include a 'nut cracker' or the paper fixed to a bit of flat wood. To produce a faceplate turning, the one hand steadies the tip of the chisel, which holds the edge against the tool rest while the other hand guides the tool. Usually do not wear gloves, loose clothing, rings or jewellery round the neck that can hang outside one's clothing. If you must use the hands always hold the paper in a way that will not allow the paper to catch, pull or entangle round the stock. What in the event you avoid when working with a wood turning lathe? Use appropriate tools to hold the sand paper or emery paper whenever you can.
Clothing ought to be comfortable but not so loose that it can catch on the device or get entangled with any rotating parts or the wood being turned; shirts ought to be tucked in and long hair tied back. Have a look at our What’s New listing to see what has been added or revised. Put in a badge to your website or intranet which means that your workers can easily find answers to their health and safety questions. How do we make our services more useful for you? Do not leave a running lathe unattended - leave only after the lathe has been turned off and it has come to a complete stop. Usually do not use stock containing checks, splits, cracks, or knots. Usually do not use makeshift tools. CCOHS is not responsible for any loss, claim, or demand arising or indirectly from any use or reliance upon the information directly. Contact us to tell us. Although every effort is made to ensure the accuracy, currency and completeness of the info, CCOHS does not guarantee, warrant, represent or undertake which the given information provided is correct, accurate or current.