Pellet Stove FurnacePellet stoves are available as freestanding units or fireplace inserts that give your home the look of an old-fashioned fireplace with wood burning. They are available as freestanding models as well as fireplace inserts. They can give the appearance of a traditional wood-burning fire.
The auger transports pellets from the hopper into the combustion chamber, where they are burned and produce heat. Sensors detect the flame and adjust the speed of operation to maintain a desired room temperature.
1. Energy Efficiency
Pellet stoves make use of a non-toxic, renewable fuel made from compressed sawdust and other substances. These are usually put in landfills, but they can be used to create a clean and efficient source of heat. As a result, they aid homeowners in reducing their energy consumption and reduce greenhouse gas emissions. Many users of
miniature pellet stove stoves say that they have recouped their initial investment in just a few short years by reducing their heating bills.
Pellets are extremely compressed and are more dense than natural wood, making them more efficient to burn. They also produce less creosote compared to traditional wood-burning fires. They are also packaged in plastic bags that seal out moisture and require less frequent cleaning.
Pellet stoves, as with other heating systems need to be properly vented and sized. A professional technician will be able to evaluate your venting needs and space requirements in order to get the best results.
When the hearth is installed, it is constructed to the right size, and the vent is installed through a pre-cut hole in your home's siding. The vent is then placed on either a side wall or the roof, based on your preference and the local regulations.
After the vent and hearth are completed, the pellet stove may be connected. Certain manufacturers offer an electronic remote control that makes it simple to begin and keep the fire going, while other manufacturers offer additional sensors that check airflow and combustion as well as flue temperatures and pressure. When the system detects it requires more or less pellets, it signals the auger to speed up or slow down in line with the need.
Every stove has a storage hopper that holds between 35 and 130 pounds of pellets until needed. The size of the hopper determines how often you need to refill your stove. Larger hoppers can be used for longer periods before a refill is needed. A grille draws air out of the room, passes it through the heat exchanger and blows heated air through the living space through convection. A grate or auger spreads the pellets, and a pan underneath will collect any unburnt ones as well as the ashes of combustion.
Pellet stoves are more energy-efficient than wood-burning stoves, but they are not as efficient as electric heaters or natural gas furnaces. Electric components that drive motorized components of the stoves require an electrical supply. This could cause an issue in the event of power outage, but backup systems like batteries and generators are available.
2. Low Maintenance
Pellet stoves are incredibly efficient, however, like any other major heating appliance, they require some maintenance to ensure that they function properly. Regularly cleaning your stove's exhaust vent and stove will prevent the build-up of harmful creosote, which can cause a fire, explosion or damage to your stove or house.
A pellet stove burns natural wood particles or other materials (like nutshells, corn kernels or small pieces of scrap wood). The pellets are inserted into the combustion chamber through an auger that is powered by electricity. The speed at which pellets are fed into the burner is controlled by the thermostat you set. The fire can continue to roar, or it can be modulated lower and even extinguished in accordance with the temperature you set. When the fire is out, the ash is dropped into an empty ash tray underneath the burner. It can then be easily removed and then disposed of.
Pellets are made from waste products that would have been thrown away in the process of processing lumber. They are a renewable resource and emit less dust than traditional wood-burning appliances, making pellet stoves a cleaner heat source. The amount of carcinogens, carbon monoxide and other harmful chemicals released from pellet stoves is less than the latest EPA certified wood stoves.
These stoves aren't required to be vented through chimneys, as is the case with traditional wood stoves. Instead, they must be vented correctly through a wall, or any other exterior structure. Pellet stoves come with flue ports at the front or back of the appliance. They are connected to a ventpipe which extends out from the house.
A pellet stove comes with one drawback: you have to purchase or store enough fuel pellets to last the whole winter season. On average, homeowners of a pellet stove use three tons of pellets throughout the course of the winter at $200 per ton. The costs can will increase over time however, it's less expensive than buying and hauling firewood to traditional fireplaces or stove. It is recommended to purchase enough pellets to ensure your stove can run through the winter's coldest months. Also, you require a location to store the pellets (preferably cool and dry).
3. Reduce Carbon Footprint
Pellet stoves produce heat using renewable biomass fuel, which reduces the need for finite fossil fuels. This helps reduce the carbon footprint and also helps diversify the energy sources used in homes.
Even the latest wood stoves that are EPA certified emit considerably less carbon dioxide than pellet stoves. The emissions from pellet stoves also are significantly lower than the ones from gas furnaces. Pellets can be made from sawdust and bark as well as other wood remnants. They may also contain corn, soybeans or agricultural waste. When they are burned, they release less particulates, which can cause respiratory problems and allergies, carcinogens and nitrous dioxide.
The feed system is the primary difference between a pellet stove and a wood stove. Pellet stoves have hoppers that hold the pellets. When the thermostat or sensors suggest that the room is in need of heating, the auger is turned and the pellets are pumped into the combustion chamber, where they burn and produce heat. The combustion chamber moves through a heat exchanger, which transfers the heat to the blower and out into the room. This process produces very low emissions, and creosote is not formed.
When the hopper is empty, a cyclone process removes the ash and places it in an ash pot. The stove also contains a fan to circulate the fresh, heated air into the living room. Most
pellet stove clearance sale stoves require minimal maintenance and have a large viewing space for you and your loved ones to enjoy the flames.
The quality of pellets is the primary element that influences the emissions from pellet stoves. The poor quality pellets emit more emissions. When choosing your pellets make sure they're certified to meet certain standards and do not contain other ingredients such as petroleum or urea. Find a business that offers a guarantee and will replace or repair parts in the event of a malfunction. If you're looking to take an even greener approach Some states allow homeowners to get a tax credit when installing
tiny pellet stove stoves. This is a great opportunity to help to offset the initial cost of this kind of stove and make it easier to set up.
4. Reduced Noise
Pellet stoves produce very little smoke and emissions when compared to wood-burning fireplaces. A fan is used to distribute heat more evenly in the room. This is the reason why pellet stoves require less maintenance than wood stoves. While wood stoves require regular cleaning of particulates and chemicals to avoid deterioration, pellet stoves can be cleaned by a metal vacuum cleaner.