UPVC Window Handle
replacement window handleIt is easy to repair a damaged window handle with the right tools. It's important to identify the kind of handle you have and the spindle's size before purchasing an alternative.
Older uPVC window handles have a spur that protrudes and locks over a cockspur wedge striker. These can be left- or right-handed and must be matched when replacing.
What kind of lock or handle do I have?
There are a variety of upvc window handles and locks, each having their distinct advantages and functions. The kind of handle you choose will determine how easy it is to open your windows and whether or not the locking mechanism functions in the way you want it to. Over time, and with regular use, the upvc handles on your windows could be damaged and worn out. This makes them less secure and effective. In some cases they may even fall completely off. If you find that your window handles have been removed, it's crucial to repair them as quickly as you can. This will prevent potential break-ins and protect your home from burglary.
It is a good thing that replacing your window handles made of upvc is a relatively simple task that is achievable by nearly anyone. You will need a few tools, but with the appropriate knowledge, it's simple and should only take a couple of minutes. You must know the type of handle or lock that you have on your window. This will help you select the correct
replacement windows And doors.
Inline Espagnolette Handles
They are typically located on the outside of the window. They are flat and feature a latch which engages the locking mechanism of the window frame. Inline upvc handles also come with a spindle that runs through the center of the handle and into the frame of the window to operate the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles are attached to the frame of the window by a single screw and are less secure than other kinds of window handle.
Handles that turn and tilt
The tilt and turn handles are different from other upvc handles in that they can be turned for opening the window, and then tilted into the window to allow air circulation. They typically feature a 7mm spindle on the back of the handle and are available in left and right-handed versions.
When you are purchasing replacement handles for upvc, it is important to check the spindle length since not all of them are the same size. Drop something into the middle of the hole to check the length. This is the largest spindle size that will fit your windows.
What is spindles?
uPVC window handles work similar like doors, turning the handle to operate an internal latch within the frame. The window then opens and shut. However, in some cases, these handles can become damaged, especially when they are frequently used or exposed to harsh weather conditions. You may need to replace the handles on your uPVC window if they're not able to operate it properly.
There are a variety of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are designed in a variety ways to fit into uPVC frames. Each handle type utilizes an entirely different spindle
glass for windows replacement locking the window mechanism. This is why it is essential to know what kind of handle you have installed on your uPVC window to find the right
replacement glass windows.
The base of the handle will inform you what kind of uPVC it is. There should be a "snap-in cover over one screw which holds the handle base in place. Once you remove this and you'll be able to observe the second screw that holds the base of the handle in place. Once both screws are removed you should be able to pull the handle away from the uPVC window.
Once you have removed the uPVC window handle, you will need to carefully unscrew the old spindle from the locking mechanism. Take careful note of the length of the spindle as you'll need to ensure that you buy an alternative that is the same length as your original handle and locking mechanism.
The spindle wears down and cannot operate the locking mechanism. This could be due damage from constant use, a loosening of the locking mechanism or even corrosion that occurs over time. If this happens, it is necessary to replace the window handle as well as the locking mechanism to restore complete functionality to your uPVC windows.
How do I remove my old handle?
Window handles can be damaged or even broken over the course of time. It is important to fix them as soon a possible to ensure your security. It is simple to replace a worn or damaged handle. The task can be completed in under an hour without the need of special tools.
The first step to remove the handle that was previously used is to take off the screw situated on the top of the base of the handle. Once the screw is removed, the handle will be removed from the base. A second screw is located at the bottom of the handle. This too can be removed. Once the two screws are removed, the handle can be detached from the base of the window.
Once the old handle has been removed, grab the new handle and line up the fixing holes with the holes that are present in the
window replacement cost frame. If there is a sticker or cap on the new handle, take it off it if necessary and then screw the handle into place. Once the handle is set, it is important to test that it is working by turning the handle, and ensuring that the lock mechanism is activated.
Espag handles have a spindle that protrudes from the handle and slot into a multipoint locking mechanism in the frame of the window. Cadenza windows feature a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hang over the frame of the window or the transom crossmember of the bar.
Once you have the new handle in place, you can insert the spindle into the lock in the window and then tighten it down. Once the handle is firmly fixed and secured, replace the snap-in cover and the screw cap (if necessary). Now that the handle is ready to use, open and close the window a couple of times to ensure it works correctly and securely.
How do I install the new handle?
The process of changing your window handle made of uPVC isn't difficult, and the process is quite simple. All you need is a screwdriver, and a bit of patience. First, make sure the old handle is unlocked. Then remove any screws visible. You can also replace them with screw caps. After the handle has been removed, you need to make a note of the length of the spindle that extends from the back of the handle. This is important as it will determine the type of handle you'll require to purchase.
Espagnolette handles on uPVC are the most well-known kind of handle. They have a spindle that runs through the handle and acts as an internal locking mechanism within the frame of the
window replacement glass near me. The handle opens the latch and allows the window to open. During regular use and over time, espagnolette handles may be damaged.
Cadenza handles are a kind of uPVC handle that is commonly used in tilt and turn windows. They feature a protruding knife that operates a multiple-point locking mechanism within the window. They are more secure than the espagnolette handles since they only open from the inside. They can be replaced with the same method as espagnolette handles, however you will need to ensure that the new handle has a curved blade instead of flat ones.
Once you have decided on the right handle for you, you can simply align the new handle with the screw holes, and then screw it in place. Then, you should put the screw covers on and test your new handle. This is done by moving the handle from locked to the unlocked position and then back to the locked position several times.